error - MOST not available
Depending on unit configuration you get a MOST not available error during FW installation, if MOST is not connected to unit - e.g. you are working on bench.
How to clear error
Option 1
Remove MOST coding (external AMP, VC/AID) from unit
Option 2
use MOST loop cable on the back of the unit
Option 3
Use skipMostPopup.txt flag on unit.
- Enter with Putty:
touch /net/rcc/mnt/efs-persist/SWDL/skipMostPopup.txt
Option4
use M.I.B function - Toggle skipMostPopup
Option 5 - the winner!
Community content mirrored from mibwiki.one. Always make a backup before flashing or coding a unit.