Telnet connection
==IMPORTANT!== ==Do not install this on devices without navigation, otherwise you will get a cyclic reboot in update mode.==
Unpack MSTD_Audi_NAV_Telnet to FAT32 formatted SD and install like a firmware update.
Tested on MSTD_EU_AU_P3151 navi unit.
Reference: https://www.digital-eliteboard.com/threads/audi-a3-mib-s-supportthread-mib1-mstd.432868/post-4160763
Unlock Expert Boot Mode
To enable Expert Boot Mode enter in telnet:
\MMC\TOOLS\SetBootMenu -w E
Now you can connect via TTL adapter to quadlock and in UART console can do following:
U + Enter enable/disable keyboard support
D + Enter enable/disable UBS ethernet adapter support
0 + Enter enable/disable Expert Boot Mode
1 + Enter enable/disable booting from snapshot image
Community content mirrored from mibwiki.one. Always make a backup before flashing or coding a unit.